Helio-thermal treatment is based on the principle of impact of solar radiation on hardening concrete in helioforms with translucent heat-sealing coating. Helio-thermal treatment technology efficiency is provided through the use of the natural density solar radiation flows and reaches 70 ÷ 100 kg of equivalent fuel per 1 cubic meter of reinforced concrete products as compared with conventional heat treatment of precast reinforced concrete structures in the cells with the use of steam, air-steam mixture, hot air, etc. Based on the analysis of approaches to the implementation of technology on helio-thermal treatment of concrete and reinforced concrete structures was disclosed the possibility of using this method in conditions of short and hot summer in the territory of the Russian Extreme North.

Alexandrovskiy, S.V. (1979). Application of a theory. Wroclav: Wydawnictwo. Politechniki Wroclawskiei.

Aliev, S.A. (2011). Concrete Composites based on man-made materials for the conditions of the dry hot climate. PhD Thesis. Makhachkala.

Aliev, S.A., Murtazaev, S-A.Yu. (2012). Fine-grained concrete on the basis of man-made raw materials for the conditions of a dry hot climate. Sciences of XXI century: problems of academic mobility of researchers and research methodology: the materials of the I ISPC “Energy and Energy Efficiency in conditions of geostrategic development and exploration of the Arctic region “. Arkhangelsk.

Atlas of the energy balance of the North Pole region. (1992). St-Petersburg: Gidrometeoizdat.

Bazhenov, Yu. M. (1988). Improvement of efficiency and cost effectiveness of concrete technology. Concrete and reinforced concrete, 9, 22-25

Dmitrieva, M.M.  (1976). The use of cameras with a polymeric film coating for concrete products maturing in conditions of Central Asia. Materials of II All-Union coordination meeting on the issue of "Technology of concrete work in conditions of dry hot climate".       Ashkhabad.

Gairabekov, I.G., Murtazaev, S.-A.Y., Pimshin, I.Yu., Ibragimova, E.I. (2015). Certain peculiarities of geodetic networks for observing earth surface subsidence in the area of liquid mineral extraction. Ecology, environment and conservation, 4(Sup.), 67-78.

Grigoryan, Ye.Yu. (2007). Investigation of properties of loess soils by sounding (North Caucasus case study): PhD Thesis. Stavropol.

Krutov, V. I. (2007). Foundation engineering on subsiding soils. Bases, foundations and mechanics of soils, 6, 9-11.

Kuladzhi, T.V., Murtazaev, S.I., Taimaskhanov, K.E.,Aliiev, S.A., Mintsaev, M.S. (2015). Professor M. D. Kargopolov's matrix formula-an effective tool to find the cost of construction products. Indian Journal of Science and Technology, 8(29), 48-56.

Malinskyi, E.N., Zasedatelev, I.B., Temkin, E.S.  and others. (1983). А.с. 1018343 USSR С 04 В 41/30. Freshly laid concrete curing procedure. Discoveries. Inventions, 18, 20-23.

Manual on helio-thermal treatment of concrete and reinforced concrete products using SVITAP coatings (for SNIP 3.09.01-85). (1987). Moskow:  NIIZhB (Concrete and Reinforced Concrete Research Institute).

Manual on helio-thermal treatment of concrete and reinforced concrete products using SVITAP coatings at year round grounds, approved by NIIZhB (Concrete and Reinforced Concrete Research Institute) of the State Committee for Construction of the USSR. (1988). http://base.consultant.ru/

Manual on the thermal treatment of concrete and reinforced concrete products. (1974). Moskow: Stroiizdat.

Marshunova, M.S., Mishin, A.A. (1988). Monitoring of the atmosphere transparency in the polar regions. In: Monitoring of the Arctic climate (pp. 132-140). Leningrad: Gidrometeoizdat.

Mazhiev, Kh.N., Betilgiriev, M.A. (2012). Improvement of the regional economics efficiency on the basis of realization of new industrial materials and technologies. Issues of economics and production, 46, 80-84.

Murtazaev, S.-A.Y., Lesovik, V.S., Bataiev, D.K.-S., Chernysheva, N.V., Saidumov, M.S. (2015a). Fine-grainedcellular concrete creep analysis technique with consideration forcarbonation. Modern Applied Science, 9(4), 233-245.

Murtazaev, S.-A.Y., Mintsaev, M.S., Saydumov, M.S., Aliev, S.A. (2015b). Strength and strain properties of concrete, comprising filler, produced by screening of waste crushed concrete. Modern Applied Science, 9(4), 32-44.

Paschenko, A.A. (1991). The theory of cement. Kyiv: The builder.

Research and Application guide to the Russian climate (Arctic region): Solar radiation. (1997). St-Petersburg: Gidrometeoizdat.

Rybasov, V.P., Bykova, I.V. (1988). Helio-thermal treatment of concrete products using the film-forming materials according to SGITIP method. Materials of coordination meeting on the issue of: "Technology of concrete work in conditions of dry hot climate". Dushanbe.

Shifrin, S.A., Tkachev, A.V.  (1985). Thermal interaction of hardening concrete and the concrete base under conditions of solar radiation. VNIPITeploproekt: Special concrete and buildings, 78, 19-27.

Singh, M. (2002). Treating waste phosphogypsum for cement and plaster manufacture. Cement and Concrete Research, 32, 1033-1038.

Ulitskiy, I.I. (1967). Theory and calculation of reinforced concrete frame constructions, taking into account long-term processes. Kyiv: Builder.

Zasedatelev, I.B., Malinskyi, E.N., Mironov, S.A. and others. (1983). А.с. 1050185 USSR, В 28 В 7/00, С 04 В 41/30. The form for manufacture of concrete mixes with natural hardening in hot climates. Discoveries. Inventions, 39, 15-19.